Installation Guide

Step One: Clear and Mark the Edging Line

Begin by clearing debris, grass, or old borders along the area where you plan to install the edging. Use a string line, garden hose, or marking paint to define the desired shape and placement.

Step Two: Position the Edging Panels

Place the Corten steel edging panels along the marked line. Take your time to align them properly, especially around curves or corners.

Step Three: Connect the Panels

Use the included connector pieces (brackets, sleeves, or pins) to securely attach adjacent edging panels together. Ensure the joints are tight and flush for a seamless look.

Step Four: Anchor the Edging into the Ground

Place a wooden block or protective board on top of the edging to prevent damage. Using a mallet or hammer, gently drive the edging into the soil to the desired height.

Step Five: Adjust and Finalize

Once installed, make any final adjustments to the alignment or shape. Ensure the edging is stable, consistent in height, and visually appealing from all angles.